i550 – Aluminium Motorboat Concept symbolize a new approach to spending time with your loved ones and is an ideal place for socializing on the water. The picnic table is the central point of this 5.5 meter open recreational boat. Despite the relatively short length, the boat has 6 seats and a comfortable mattress for a blissful rest after eating together.
i550 is a motor boat designed for recreational sailing in coastal waters (cat. C). The hull and the entire structure are made of aluminum alloys, intended for the construction of sea-going vessels (5083). Used fittings and equipment are the highest quality. Boat is designed using materials such as stainless steel, aluminum and wood. The concept of the boat assumes the possibility of a wide configuration, e.g. wooden or synthetic floor, and a wide range of upholstery made of selected materials. Thanks to this, we can provide each unit with a unique design.
Characteristics of Aluminium Motorboat Concept
- Designed as a family picnic boat
- Easy and enjoyable to handle
- Safe and unsinkable
- Hassle-free operation
The range and autonomy of swimming
The operating range of this Aluminium Motorboat Concept is in accordance with design category C – boats intended for voyages in coastal waters, large bays, lagoons, lakes and rivers where wind forces up to and including 6o on the Beaufort scale and significant wave heights up to 2 m, inclusive, may occur. It is estimated that at an optimum cruising speed of approx. 12kn, the unit will stand approx. 9.5h (110Mm), and at a maximum speed of 25kn, it may be approximately 3h (70Mm).
Layout
This Aluminium Motorboat Concept features a spatial layout specifically designed for a typical recreational picnic motorboat. Comfortable seating areas have been designated for a six-person crew, arranged to ensure maximum comfort during cruises.
At the bow, spacious seating benches will be installed, which can also serve as sunbeds, allowing relaxation in full sun. Further aft, in the midship area, there is a double seat at the helm with an adjustable backrest, allowing the position to be adapted to the individual needs of the helmsman and passenger. On the opposite side, there is a spacious aft sofa where one can sunbathe and rest during stops.
All seats have been specially designed with ergonomics in mind, taking into account user requirements. They are characterized by high comfort during both recreation and vessel operation, thanks to appropriate profiling and the use of high-quality upholstery materials.
At the bow, there is a spacious anchor locker, providing safe storage for mooring lines and anchor. In the aft seats and under the deck at midship, special storage space has been designated for non-permanent vessel equipment, such as life jackets, swimming gear, or crew’s personal belongings. Additionally, in the helmsman’s seat on the passenger side, there is a practical drawer cooler, allowing drinks and snacks to be stored within arm’s reach during the cruise.
Propulsion
The Aluminium Motorboat Concept will be equipped with an outboard combustion engine with power ranging from 80 to 100 HP, guaranteeing optimal performance and efficient navigation on both calm waters and in more demanding conditions. The fuel system includes an aluminum tank with a capacity of approximately 115 liters, designed to ensure considerable autonomy during cruises. This fuel capacity allows covering long distances without the need for frequent refueling, thus enhancing the boating experience and the vessel’s operational versatility.
Learn more about our projects and their realization on our social media: Facebook, Instagram, LinkedIn !!
